Filter
Top Products
Video 97
Advanced Image Stabilization
The image stabilizer reduces camcorder blur (blur due to the cam-
corder moving) so you can get nice, stable shots. Select the image sta-
bilization mode according to the shooting conditions.
Operating modes:
1Press .
2 Select the IS mode.
Options
(
Default value)
[Dynamic]
Compensates for a higher degree of camcorder
shake, such as when shooting while walking, and is more effec-
tive as the zoom approaches full wide angle.
[Standard]Compensates for a lower degree of camcorder
shake, such as when shooting while remaining stationary, and is
suitable for shooting natural-looking scenes.
[j Off] Use this setting when the camcorder is mounted on a
tripod.
Powered IS
You can use Powered IS to make the image stabilization even more
powerful. Powered IS is most effective when you are stationary and
zooming in on far subjects using high zoom ratios (the more you
approach the telephoto end). Holding the LCD panel with your left
hand will add to the stability of the shot.
• By default, the custom control button (A 179) is set to
[È Powered IS].
[ Other Settings] > p > [Image Stabilizer] >
Desired IS mode > [X]
[FUNC.] > [È Powered IS] > [ON] > [X]
COPY