Filter
Top Products
You can play back images on a television with the supplied AV
cable.
Turn off the Camera and the TV.
Connect the AV cable to
the camera's A/V OUT ter-
minal.
eOpen the DIGITAL terminal cover
with a fingernail from the lef[ side
and plug the AV cable in all the
way.
Plug the other ends of the
AV cable to the VIDEO IN
and AUDIO IN jacks on the
TV.
Turn on the TV and switch it to video mode.
Turn on the camera.
• The video output signal can be switched (NTSC or PAL) to
accommodate different regional standards (p. 27). The
default setting varies between regions.
- NTSC: Japan, U.S.A., Canada, Taiwan and others
- PAL: Europe, Asia (excluding Taiwan), Oceania and others
Ifthe video system is set incorrectly, the camera output may
not display properly.
• You can also use the TV as the display in the shooting
mode.