Filter
Top Products
Insufficient light for OSet the flash to [] (flash on) (Basic
shooting. Guide p. 14).
The subject is OSet the exposure compensation to a
underexposed because positive (+) setting (p. 56).
the surroundings are too OUse AE lock or use the spot metering
bright, function (pp. 53, 55).
Subject is too far away oShoot within correct flash range of
for flash to reach, the subject when using the built-in
flash (p. 139).
ORaise the ISO speed and then shoot
(p. 69).
Subject is too close, oShoot within correct flash range of
making the flash too the subject when using the built-in
strong, flash (p. 139).
The subject is OSet the exposure compensation to a
overexposed because negative (-)setting (p. 56).
the surroundings are too OUse AE lock or use the spot metering
dark. function (pp. 53, 55).
Too much light is shining OChange the shooting angle.
directly into the camera,
or is being reflected off
the subject.
Flash is seito0n ..................oSetthefiash io [] (flash 0if)i#as;c
Guide p. 14).
ISO speed is too high. oH gher SO speeds and the [] (High
ISO Auto) setting may increase image
noise. For higher image quality, select
as low an ISO speed as possible
(p. 69).
olnJ_, M, _], _1], I_1, [_, [] and
I_ modes, the ISO speed increases
.........................................................................................and no!se can appear ...............................................