Filter
Top Products
Various Shooting Methods
119
2
Press the button.
• The camera will switch to color input
mode and the display will alternate
between the original image and the
color swap image (using the
previously set color).
3
Aim the camera so that the original color
appears at the center of the LCD monitor and
press the button.
• Only one color can be specified.
• You can use the or button to specify the range of colors
that are swapped.
-5: Only takes the color that you want to swap
+5: Also takes colors close to the one that you want to swap
4
Aim the camera so that the desired color
appears at the center of the LCD monitor and
press the button.
• Only one color can be specified.
5
Press to complete the setting, then shoot.
z
The default setting for color swap mode changes green into white.
z You may not obtain the expected results if you use the flash.
z The colors specified in the color swap mode and the color
range are retained even if the camera's power is turned off.
z The ISO speed may increase, or the noise in the image may
increase depending on the shooting conditions.