Changing Shooting Function Settings
170
Choose [Set Shortcut button], then press
the m button.
Press the opqr buttons or turn the 5
dial to choose the functions to register,
then press the m button.
Press the button to call up the
registered function.
Registering Functions to the Button
• Choose if you want to return the button to default settings.
• When this symbol is shown on the bottom right of an icon, the
function cannot be used in the current Shooting mode or function setting.
• In , each press of the button records white balance data (p. 80),
and the white balance settings change to .
• In %, each press of the button will adjust and lock the focus, and
% will appear on the screen.
• If you press the button in , both the screen and viewfinder
displays will turn off. Try one of the following to restore the displays:
- Press any button other than the ON/OFF button
- Change the camera’s vertical or horizontal orientation
- Open and close the screen
- Raise and lower the flash