Filter
Top Products
2-21
Step 4 Install the Camera
Initial Setting and Installation of Camera
Note
Observe the following items when connecting the interface cables.
• Firmly insert the dedicated terminals on the audio interface cable into the
audio input/output terminals on the camera.
• Affix the interface cables in the specified grooves, respectively, in the order of
power supply, audio and I/O,
as shown below.
At this time, make sure the heat-shrinkable tubes that protect the cables rest
properly in front of the affixing grooves.
If the cable is not properly installed, it may come off and cause the camera to
malfunction.
Note
• When disconnecting/connecting the audio interface cable,
I/O interface cable and power interface cable, always do so by holding the
connector.
• If the audio input/output, external device input/output and external power
supply are used, do not use any cable other than the dedicated interface
cables. Damage may occur.
Affixing groove for cable Affixing groove for cableAffixing groove for cable
Power Audio I/O
Interface cable fixing method
Heat-shrinkable tube
for cable protection