Filter
Top Products
2-27
Step 4 Install the Camera
Initial Setting and Installation of Camera
5. Affix the assembled in-ceiling bracket assembled with the camera, on the installation surface.
Hook the assembled in-ceiling bracket on the screws that were loosely secured in step 3, turn
the bracket clockwise, and securely tighten (affix) the screws.
6. Adjust the camera angle and focus in the same manner as in step 7 of "Installation Procedure
for Direct Mounting on a Ceiling/Wall," and install the dome case.
7. Install the recessed mounting cover.
Finally, align the mark (c) on the recessed mounting cover with the mark (I) on the in-ceiling
bracket, and turn the cover clockwise to the mark (I) on the recessed mounting cover to affix
the bracket in position.
This completes the installation.