Filter
Top Products
3-11
Basic Settings
Camera Names
1 “Camera Name”
Used in the camera selection box on the viewers. This setting is required.
1
3 “Home Position”
Specify a home position for the camera.
“Zoom”
Set the value for the camera’s angle of zoom.
“Brightness”
Set the target value for the camera’s auto exposure feature. Select “Brighter” if the picture
is too dark due to backlight or other factors.
“Return to Home Position when nobody has a control privilege”
When this option is checked and the home position is specified, the camera is returned to
the specified settings if there is no request for control privileges.
4 “Apply View Restriction”
If you check the “Apply View Restriction” option, the settings below are enabled. Use this
setting to prevent clients from seeing certain camera zoom positions. Using the VB
Administration Tools is a convenient way to set the view restrictions (→ P.4-7).
“Telephoto, Wide-angle”
Set the zoom angles provided to users. (Specify settings so that the telephoto setting is
less than or equal to the wide-angle setting.)
5 “Wide Converter”
When you have attached a wide converter to the camera, be sure to select “Used”.
Setting Camera Control, Image Size and Quality (Camera and Video)