Filter
Top Products
10
In this setup mode, the camcorder will issue an 8-digit PIN code that you then need to enter in
the wireless router setup screen. Even if there are multiple access points active in your area,
this is a relatively reliable method of establishing a connection using a shared PIN code.
It may take about one minute to establish connection.
1
Open the [Set Up New] submenu.
[w Other Functions] > [Wi-Fi Remote] > [Set Up
New]
2
Select [WPS: PIN Code] and then press
SET.
The camcorder will generate and display an 8-digit
PIN number.
3
Enter the PIN code into the wireless
router’s WPS setup screen.
For details about how to access your wireless
router’s settings and activate the Wi-Fi Protected
Setup (WPS) using a PIN code, refer to the
instruction manual of your wireless router.
4
Within 2 minutes, press SET on the
camcorder.
While [Connecting] appears on the screen, you
can press SET or the CANCEL button to cancel
the operation.
After the connection is correctly established,
continue with the procedure to configure the IP
address assignment (A 15).
Wi-Fi Protected Setup (WPS) - PIN Code
COPY