Filter
Top Products
20
You can save up to 5 different network configuration profiles. You can select which one to use
depending on where you plan to use the camcorder. If you just saved a new network
configuration (A 16), the camcorder will automatically connect to that Wi-Fi network and this
procedure is not required.
1
Open the Wi-Fi [Select] submenu.
[w Other Functions] > [Wi-Fi Remote] > [Select]
2
Select the desired configuration
number and then press SET.
The camcorder will connect to the Wi-Fi network
using the selected configuration. The icon
will appear on the upper left of the screen, first in
yellow while connecting and then in white when
the connection is established. In the rear panel,
the bars of the icon indicate the strength of the
Wi-Fi signal.
Selecting a Configuration Number
COPY