Filter
Top Products
9
Wi-Fi Protected Setup (WPS) is the easiest way to set up the Wi-Fi network. However, it may
not work correctly if there are several active access points in the area. In such case try using
the [WPS: Pin Code] (A 10) or [Connection Wizard] (A 11) option.
1
Open the [Set Up New] submenu.
[w Other Functions] > [Wi-Fi Remote] > [Set Up
New]
2
Select [WPS: Button] and then press
SET.
3
Press the WPS button on the wireless
router.
For details about how to activate the Wi-Fi
protected setup, refer to the instruction manual of
your wireless router.
4
Within 2 minutes, press SET on the
camcorder.
While [Connecting] appears on the screen, you
can press SET or the CANCEL button to cancel
the operation.
After the connection is correctly established,
continue with the procedure to configure the IP
address assignment (A 15).
Wi-Fi Protected Setup (WPS) - Button
COPY