Filter
Top Products
E-76
OTHER RECORDING FUNCTIONS
Picture
Quality
BASIC
Size
BASIC
Sharpness
Saturation
Contrast
Use this setting to control the quality of the image.
Fine / Normal / Economy
You can specify either of two image sizes in pixels.
1280 x 960 / 640 x 480
This setting specifies the sharpness of image out-
lines.
Hard : Sharp outlines
Normal
Soft : Soft outlines
This setting controls the intensity of colors.
High : Colors appear deeper.
Normal
Low : Colors appear lighter.
This setting controls the difference between the light
areas and dark areas of the image. Contrast is not
applied in the Night Scene Mode.
High : Larger difference between light and dark.
Normal
Low : Less difference between light and dark.
Functions 1
Aperture
Shutter
Speed
Shutter
Mode
Metering
Use this setting when you want to fix the aperture at
one of the values shown below.
Auto / F3.2 / F4.8 / F8
Use this setting to fix the shutter speed at one of the
values shown below.
Auto / Manual (Bulb, 64 to 1/2000 second)
This setting specifies how the shutter operates.
Single : Records single images at an interval
of about three seconds.
Quick : Allows recording of sequential im-
ages at an interval of about one sec-
ond.
Continuous : Allows recording of sequential im-
ages at an interval of about 0.25 sec-
ond while the shutter button is held
down.
• With any of the above settings, the interval may be
longer at slow shutter speeds.
This setting sets the metering method.
Multi :Takes readings across the en-
tire image, and provides bal-
anced exposure settings.
Center :Takes reading at the center of
the image.