Filter
Top Products
92
Advanced Settings
Procedure
[r] (REC) * [MENU] * REC Tab * Anti Shake
You can turn on the camera’s Anti Shake feature to reduce image blur due to subject
movement or camera movement when shooting a moving subject using telephoto,
when shooting a fast-moving subject, or when shooting under dim lighting conditions.
NOTE
•“
A
Camera AS” only can be selected while recording with High Definition (HD)
and Standard (STD) movie.
•“S Image AS” is disabled while “S” or “M” is selected as the exposure mode.
• The ISO sensitivity setting (page 39) must be “AUTO” for “S Image AS” to work.
• Anti Shake is not supported while recording with High Speed Movie.
• Shooting while “D Auto” or “S Image AS” is selected can cause an image to
appear somewhat coarser than normal and can cause slight deterioration of image
resolution.
• Anti Shake may not be able to eliminate the effects of camera or subject movement
when movement is severe.
•“
A
Camera AS” may not work properly when the camera is mounted on a tripod.
Either turn off Anti Shake or select “S Image AS”.
Reducing the Effects of Camera and Subject Movement
(Anti Shake)
Auto Minimizes the effects of camera and subject movement
Camera AS Minimizes the effects of camera movement only
Image AS Minimizes the effects of subject movement only
DEMO
Half-pressing the shutter button demonstrates the effect of “
A
Camera AS”. However, the image is not recorded.
Off Turns off all Anti Shake settings
D
A
S
F