Filter
Top Products
156
Other Settings (SETTING)
Procedure
[MENU] * “¥ SETTING” Tab * Eye-Fi
Select “Off” to disable Eye-Fi card communication (page 148).
Procedure
[MENU] * “¥ SETTING” Tab * FlashAir
Selecting “Start with the control image” for the FlashAir card setting and selecting
“On” for the camera’s “FlashAir” setting will establish a FlashAir wireless LAN
connection (page 150).
• If the FlashAir card’s “Start automatically at boot” setting is selected, a wireless
LAN connection will be established automatically whenever the camera is turned
on.
Procedure
[MENU] * “¥ SETTING” Tab * Sounds
• Setting a volume level of 0 mutes output.
Turning off Eye-Fi Card Communication (Eye-Fi)
Configuring FlashAir Card Communication Settings (FlashAir)
Configuring Camera Sound Settings (Sounds)
Startup
Specifies the startup sound
Sound 1 - 5: Built-in sounds (1 through 5)
Off: Sound off
Half Shutter
Shutter
Operation
Operation Vol
Specifies the sound volume. This setting is also used as the
audio level during video output (page 117).
Playback Vol
Specifies the volume of movie audio output. This volume
setting is not used during video output (from the USB/AV port)
(page 117).