Filter
Top Products
92
Advanced Settings (REC MENU)
Advanced Settings (REC MENU)
The following are menu operations you can use to configure various camera settings.
• You also can use the Control Panel (page 38) to configure some of the settings that
appear on the menu screen. Refer to the page references provided in this section
for information about configuring settings using the Control Panel.
. Example Menu Screen Operation
1. In the REC mode, press [MENU].
This will display the menu screen (r REC
MENU).
• Menu contents are different in the REC mode
(r REC MENU) and PLAY mode (p PLAY
MENU).
2. Press [4], use [8] and [2] to select the tab
where the menu item you want to configure
is located, and then press [6].
3. Use [8] and [2] to select the menu item
you want, and then press [6].
• Operating the zoom controller displays the next
page of menu items.
4. Use [8] and [2] to change the setting of
the selected menu item.
• In the case of the menu items below, use [4]
and [6] to select the setting you want.
Make-up Level, EV Shift, White Balance
5. After the setting is the way you want, press
[SET] to apply the setting and return to the
viewfinder screen.
• Pressing [MENU] cancels the current selections and returns to the menu
screen.
• To display a different tab, press [MENU] to move the blue boundary to the
menu item and then press [4]. Next use [8] and [2] to select the tab you
want, and then press [6].
• Pressing [Õ] (Continuous Shutter) interrupts the menu operation and exits the
menu screen.
NOTE
• Depending on the recording mode, some of the items on the menu that appears
may not be usable.
Configuring Recording Settings
[MENU]
[SET]
[8] [2] [4] [6]
Items
Example:
When “Self-timer” is
selected on the “
r
REC
MENU” tab
Tabs