Filter
Top Products
User’s Manual
36
• START POINT
Follow the description to set the start position for the AUTOPAN path.
1. Move the cursor to <START POINT> and press <ENTER> while <TO
FIND> is flashing - the option will change to <TO SAVE> automatically.
2. Move the PTZ camera to the desired position and press <ENTER> to save
the position as the start point; the cursor will move to <END POINT>
automatically. Set the end point to complete the auto-pan setting.
NOTE: The tilt and zoom values for the start point will be recorded
and fixed for the selected auto-pan line.
• END POINT
The user can set the end point once the start point has been defined. Pan the
PTZ camera to another position and press <ENTER> to save the position as
the end point.
• DIRECTION
This option is used to set the AUTOPAN direction for the PTZ camera. If you
select <RIGHT>, the camera will start to pan clockwise from the start point to
the end point and then return to the start point. If you select <LEFT>, the
camera will start to pan anticlockwise from the start point to the end point.
Refer to the diagram below.
• SPEED
This option is used to define the PTZ camera rotation speed while running
auto-pan. The speed is adjustable between 1 and 4; refer to the table below
for details.
PAN (degree/sec.)
Speed 1
10
Speed 2
23
Speed 3
35
Speed 4
45