Filter
Top Products
ÉPIX™ Drive 640 User Manual
Page 11 of 14
Programming
Refer to the ArKaos MediaMaster™ software manual for detailed
instructions on installing and programming this product.
Product
Maintenance
To maintain optimum performance and minimize wear, you should clean
this product frequently. Usage and environment are contributing factors in
determining the cleaning frequency.
As a rule, clean this product
at least twice a month. Dust build up reduces
light output performance and can cause overheating. This can lead to
reduced light source life and increased mechanical wear.
To clean your product:
• Unplug the product from power.
• Wait until the product has cooled.
• Use a vacuum (or dry compressed air) and a soft brush to remove dust
collected on the external vents and accessible internal components.
• Clean all external surfaces with a mild solution of non-ammonia glass
cleaner or isopropyl alcohol.
• Apply the solution directly to a soft, lint-free cotton cloth or a lens
cleaning tissue.
• Wipe any dirt or grime to the outside edge of the surface.
Gently polish
the surfaces with the lint-free cotton cloth or lens cleaning tissue until
they are free of haze and lint.
Always dry the external surfaces carefully after cleaning them.