Filter
Top Products
ÉPIX™ Drive 640 User Manual
Page 8 of 14
Input Power
The ÉPIX™ Drive 640 has swichable power supply that works with an
input voltage of 120VAC, 60 Hz or 230 VAC 50/60 Hz.
Make sure that you are connecting this product to the proper voltage. To
determine the power requirements for the ÉPIX™ Drive 640
, refer to the
specification
label affixed to the product or the specifications in this
manual.
Never connect this product to a rheostat (variable resistor) or
dimmer circuit, even if the rheostat or dimmer channel serves only as
a 0% to 100% switch.
Power Linking
The ÉPIX™ Drive 640 supports power linking. You can power link up
to three (3) ÉPIX™ Drive 640’s at 120 VAC or six (6) at 230 VAC.
This product comes with a power input cord. This product does not come
with a power linking cord; however, a power linking cord
is available as
an option.
You can only link up to three (3) ÉPIX™ Drive 640 products at 120
VAC or six (6) at 230 VAC! Refer to the Technical Specifications
section of this manual for further information.
Drive Power Linking
Diagram