ÉPIX™ Drive 640 User Manual
Page 4 of 14
Safety
Notes
Read all the following Safety Notes before working with this product.
These notes
include important information about the installation, usage,
and maintenance of this product.
There are no user-serviceable parts in this product. Any reference to
servicing in this User Manual applies only to properly certified
CHAUVET® technicians. Do not open the housing or attempt any
repairs unless you are certified by CHAUVET®.
Please refer to all applicable local codes and regulations for proper
installation of this product.
Personal
Safety
• Always disconnect this product from its power source before servicing.
• Always connect this product to a grounded circuit to avoid the risk of
electrocution.
• Do not touch this product’s housing during operation
because it may be
very hot.
Mounting
and
Rigging
• This product is for indoor use only! To prevent risk of fire or shock, do
not expose this product to rain or moisture.
• Make sure there are no flammable materials close to this product while
it is operating.
• When hanging this product, always secure to a fastening device using a
safety chain/cable (not included).
Power and
Wiring
• Always make sure you are connecting this product to the proper
voltage, as per the Technical Specifications in this manual or on the
product’s specification label.
• Never connect this product to a dimmer pack or rheostat.
• Never disconnect this product by pulling or tugging on the power
cable.
Operation
• Do not operate this product if you see damage on the housing, I/O
ports, or cables. Have the damaged parts replaced by an authorized
technician at once.
• Do not cover the ventilation slots when operating to avoid internal
overheating.
• The maximum ambient temperature is 104° F (40° C). Do not operate
this product at a higher temperature.
• In case of a serious operating problem, stop using this product
immediately!
In the unlikely event that your CHAUVET® product may require service,
contact CHAUVET® Technical Support.