Filter
Top Products
TO CHANGE THE PAN RANGE:
1) Press <MODE/ESC> until , , or is displayed..
2) Use the <UP>
and <DOWN> buttons to scroll through the three options.
is 540°;
is 360°; is 180°
Note: These settings only apply if the fixture is in master/slave or stand-alone modes. These
setti
ngs will not affect a fixture operating in DMX mode.
TO CHANGE THE TILT RANGE:
1) Press <MODE/ESC> until , , or is displayed..
2) Use the <UP>
and <DOWN> buttons to scroll through the three options.
is 270°;
is 180°; is 90°
Note: These settings only apply if the fixture is in master/slave or stand-alone modes. These
setti
ngs will not affect a fixture operating in DMX mode.
Service Functions
TO RESET THE FIXTURE:
1) Press the <MODE/ESC> button until is displayed, and then press the <ENTER>
button. The fixture will now reset itself.
TO RESTORE ALL SETTINGS TO THEIR FACTORY DEFAULTS:
1) Press the <MODE/ESC> button until is displayed, and then press the <ENTER>
button. The fixture will now load all factory default settings.
Intimidator Spot 2.0 HTI Manual 16 2007-01-24/09:36