Filter
Top Products
16
8.
When the Add Global Pool Item dialog box appears:
a. Choose outside from the Interface drop-down menu.
b. Click Port Address Translation (PAT) using the IP address of the interface.
c. Assign the same Pool ID for this pool as you did in Step 6d. (For this scenario, the Pool ID is
200.)
d. Click OK. The displayed configuration should be similar to the following:
9. Confirm that the configuration values are correct, then:
a. Click OK.
b. Click Apply in the main ASDM window.
Note Because there are only two public IP addresses available, with one reserved for the
DMZ server, all traffic initiated by the inside HTTP client exits the adaptive security
appliance using the outside interface IP address. This configuration allows traffic
from the inside client to be routed to and from the Internet.