Filter
Top Products
3-2
Cisco Video Surveillance System 2621 IP Dome User Guide
OL-24129-02
Chapter 3 Configuring and Managing the IP Camera
Configuration Overview
Ta ble 3-1 Guidelines for Configuring the IP Camera
Configuration Item Explanation Guidelines for Use Reference
IP camera name and
description
Identifies the IP camera. Recommended. See the “Basic Setup Window”
section on page 3-5.
LED operation Determines whether the LEDs
on the front of the IP camera
light or remain off.
Optional. See the “Basic Setup Window”
section on page 3-5.
Time information Sets the date and time for the IP
camera. Also determines how the
IP camera obtains the date and
time, its time zone, and whether
it adjusts for daylight saving
time.
Recommended. See the “Basic Setup Window”
section on page 3-5.
Network options Determine how the IP camera
obtains its IP address, and
provides options for configuring
subnet mask, gateway, and DNS
servers.
IP address is required if DHCP is
not enabled in your network,
other items depend on your
network configuration.
See the “Basic Setup Window”
section on page 3-5.
Advanced network
and protocol options
Determine whether the IP
camera uses Cisco Discovery
Protocol (CDP) and it uses
Bonjour, configure alternate
ports for HTTP or HTTPS
connections, configure RTP or
RTSP options, and configure
QoS.
Optional, depending on your
network and requirements.
See the “Advanced Setup
Window” section on page 3-7.
IP address filters Controls access to the IP camera
by IP address.
Optional. See the “IP Filter Window”
section on page 3-10.
EAPOL Configures Extensible
Authentication Protocol Over
LANs (EAPOL) for
authenticating and controlling
user traffic to a protected
network
Optional. See the “EAPOL Window”
section on page 3-11.
IP camera users Sets the password for the IP
camera administrator, and sets
log in credentials and privileges
for up to 20 users.
Optional. See the “Users Window” section
on page 3-12.
Video options Sets video resolution and quality,
whether you use one or two
video streams, streaming mode,
picture appearance, whether
video includes a time stamp or
text overlay, and how the IP
camera handles day and night
vision modes.
Optional, depending on your
requirements.
See the “Video Window” section
on page 3-16.