Filter
Top Products
18
TAKING PICTURES/VIDEO CLIPS
TAKING PICTURES
BASIC STILL IMAGE SHOOTING
1. Set the camera mode switch to .
2. Frame the subject with the LCD or viewfinder.
3. Press the T or W button to zoom in or zoom out the subject.
4. Press the Shutter button halfway down to activate the auto-focus until
AF LED stops blinking and the white AF Frame turned into green.
• The shutter speed and aperture values will appear on the LCD
monitor.
5. Press the Shutter button fully down to capture the image.
1. If the Shaking Warning indicator (
) is shown on the LCD, that means the shutter speed
is slow, and you should place the camera on a tripod or a steady place before shooting in
order to ensure the image quality.
2. In the following conditions, the AF LED will continue to blink and the AF Frame will remain
in red:
• There are several subjects at different distances within the focus lock area. Recompose
the picture by moving the camera slightly.
• There is no color contrast. Recompose the picture with a subject that contains more color.
• There is insufficient lighting. If possible, increase the lighting in the surrounding area.
REVIEWING THE FILE AFTER SHOOTING
The quick playback function is available in each shooting mode.
1. Press the
button, the last captured photo or video clip will be
shown on the LCD. If it is video clip, press the SET button to replaying
the video.
2. If you are not satisfied with the picture or video, you can delete it
directly by pressing the
button first, then press the or