Filter
Top Products
30
FILE NAMES & PRINTING
1. Press the button.
2. Press the
to select the Setup.
3. Press the
or to select File NO. Reset then press the SET or
button.
4. Press the
or to select On or Off and then press the SET
button.
1. Setting the File No. Reset to OFF is useful for avoiding file name duplication when images
are downloaded to a computer.
2. If the File No. Reset is set at ON position, when the memory card is formatted, the folder
number and the file number are initialized and the count starts from 100 and 0001. If the file
Number Rest is set to OFF, when the memory card is formatted, the numbering starts with
the last file and folder number stored in the camera.
SELECTING PICTURES FOR PRINTING
You can select pictures for printing and specify the number of printing copies. This is extremely
convenient for sending pictures for printing by a photo developing service or on a direct print
compatible printer.
Selecting Pictures for Printing
1. In Review mode, press or to select the picture to be printed.
2. Press
button.
3. Press the
or to select Print Order.
4. Press SET or
to enter the PRINT setting menu.
5. Press
or to select Single or All then press the SET or
button. The setting printing order submenu appears.
6. Press the
or to set the number of copies (up to 999), then
press
to confirm the setting.
7. Press the
or to set date On or Off, then press SET button to
confirm the setting.
8. Press the
button to close the menu window.