Filter
Top Products
12
2.4 Wall bracket installation.
Step 1:
Feed the supplied dome wiring harness through the channel inside the wall
bracket as illustrated in Figure 13. Verify that the 8 pin connector is remaining
outside the opening of the bracket.
Fig. 13
Step 2:
Affix the wall bracket to the wall verifying that the surface you are attaching to
can support the weight of the dome using either expanding anchors or butterfly fasteners
as illustrated in Figure 14.
Fig. 14
Note: Different bracket options may be available. Illustrations are for reference purposes only and may vary from
actual package contents depending selected installation options at time of order.
Feed the cable through, BNC end first.
Expanding fasteners