Filter
Top Products
4
IMPORTANT SAFEGUARDS
1. Read these instructions before attempting installation or operation of dome device
2. Keep these instructions for future reference
3. Heed all warnings and adhere to electrical specifications
4. Follow all instructions
5. Clean only with non abrasive dry cotton cloth, lint free and approved
acrylic cleaners
6. Should the lens of the camera become dirty, use special lens cleaning cloth and solution to
properly clean it.
7. Do not block any ventilation openings.
8. Install in accordance with manufacturer’s instructions
9. Use only attachments or accessories specified by the manufacturer
10. Verify that the surface you are planning to use for attaching the dome can
adequately support the weight of the device and mounting hardware
11. Protect this devices against lighting storms with proper power supplies
12. Refer all servicing to qualified service personnel. Servicing is required when the device has
been damaged in any way, when liquid traces are present, or the presence of loose objects is
evident or if the device does not function properly, or has received sever impact or has been
dropped accidentally.
13. Indoor dome is for indoor use only and not suitable for outdoor or high humidity locations. Do
not use this product under circumstances exceeding specified temperature and humidity ratings.
14. Avoid pointing the camera directly to the sun or other extremely bright objects for prolonged
period of time avoiding the risk of permanent damages to the imaging sensor.
15. The attached instructions are for use by qualified personnel only. To reduce the risks of electric
shock do not perform any servicing other than contained in the operating instructions unless
you are qualified to do so.
16. During usage, user should abide by all electrical safety standards and adhere to electrical
specifications for the operation of the dome. The control cable for RS485 communications as
well as the video signal cables should be isolated from high voltage equipment and or high
voltage cables.
17. Use Certified / Listed Class 2, 24 VAC power supply transformer only.