Filter
Top Products
SETTING UP REMOTE ACCESS FOR Q-SEE DVR SYSTEMS
MODEL NUMBER: QC40198
4 | Page
Picture 11
TO ACCESS THE DVR THROUGH INTERNET EXPLORER:
Once you have setup the network settings on the DVR to match the settings of your router and forwarded
the ports needed by the DVR (for remote access over the internet), you need to modify your browser
controls. You need to allow Pop-ups. To do so go to the Internet Explorer tool bar and select the "tools"
option (RED box in Picture 12), then select the "Pop up Blocker" option and select "Turn Off Pop-up
Blocker” (BLUE arrows in Picture 12). You will also need to enable Active X controls. To do so go to the
Internet Explorer tool bar and select the "tools" option, then "Internet Options"(GREEN arrow in Picture
12), In the windows that opens (Picture 13) Go to "Security" (RED box in Picture 13), then click the
"Custom Level" button (GREEN box in Picture 13), then click on OK (BLUE arrow in Picture 13). This will
open the page shown in Picture 14. On this page scroll down to the ActiveX Controls and Plug Ins and
make sure they are all set to either prompt (RED arrows) or enabled (BLUE arrows).
Picture 12