Filter
Top Products
SETTING UP REMOTE ACCESS FOR Q-SEE DVR SYSTEMS
MODEL NUMBER: QC40198
5 | Page
Picture 13 Picture 14
To connect to the DVR from the remote computer you would then open an Internet Explorer browser
window and enter the internet IP of your router that you got by going to
www.myipaddress.com.
Notice: If you cannot use HTTP port 80 because it is being used by another program, or it is
being blocked by your service provider, you can use another port in the same range such as
83, 85, 89, etc. If you do so then you need to forward the IP address of the router to the other
port, change the port in the DVR NETWORK settings and you need to add the port number
after the IP address. For example, if you set the HTTP port as 83, you need to enter the IP
address as 192.168.0.25:83.
User name and password here are the same as that used on the DVR. The default user name
is admin and password is also admin.