Filter
Top Products
~ 10 ~
ii. Go to the section below: To access the DVR through Internet Explorer
iii. Otherwise, if the ports are not open, you will get the following message: “Error: I
could not see your service on 64.206.234.34 on port (80) - Reason: Connection
refused”.
If you get this error, call your Internet Service Provider (ISP) and ask
them to unblock those ports for you.
iv. After your ISP unblocks those ports for you, repeat steps i and ii.
When you access the DVR from a remote computer you also need to use a different address in the
Internet Explorer browser window. Instead of entering the IP address of the DVR you need to enter the
public IP address of the router the DVR is attached to. You can get this address by going to
www.myipaddress.com from a computer that is attached to the same router as the DVR. This website will
display the box in the picture below that shows the IP address you need to use. It will be in the space
where the below example shows 76.254.183.54.