Filter
Top Products
~ 16 ~
e. Once you have completed steps a-d, go to the Main Menu and select the Setup icon (Red box in Fig 3), then select the
Network icon (Red box in Fig 4), this will display the NETWORK screen shown in Fig 5.
Fig 3 Main Menu Fig 4 Setup
f. Put a checkmark in the DDNS option (Red Box in Fig 5), then select the MYQ-SEE option from the drop down box, and
enter the account information you setup on the myq-see.com site into the boxes under the drop down box (see Fig
6).
Fig 5 DDNS
NOTICE: You need to put your public DNS in the Network Setup on the DVR (Green Box in Figure 5).
This can be found in your Router Status tab. There are usually 2 DNS entries (DNS1 & DNS2). If you
router does not list the DNS address get it from your Internet Service Provider.