Filter
Top Products
~ 11 ~
To access the DVR through Internet Explorer: once you have setup the network settings on the DVR
to match the settings of your router and forwarded the ports needed by the DVR (for remote access over
the internet), you need to modify your browser controls. You need to allow Pop-ups. To do so go to the
Internet Explorer tool bar and select the "tools" option (RED box in Pic 1), then select the "Pop up Blocker"
option and select "Turn Off Pop-up Blocker” (BLUE arrows in Pic 1). You will also need to enable Active X
controls. To do so go to the Internet Explorer tool bar and select the "tools" option, then "Internet
Options"(GREEN arrow in Pic 1).
Pic 1
Pic 2
Click on Security Tab. Click on Trusted Sites. Click on Sites
button.
Pic 3
Uncheck the box for Require Server verification. Put the IP
addess of the DVR or WAN IP address in the Add this websites
to the zone box and click on Add button. Click on Close
.