Q-See QT4 Security Camera User Manual


 
~ 3 ~
R
R
E
E
M
M
O
O
T
T
E
E
M
M
O
O
N
N
I
I
T
T
O
O
R
R
I
I
N
N
G
G
G
G
U
U
I
I
D
D
E
E
F
F
O
O
R
R
Q
Q
T
T
4
4
S
S
E
E
R
R
I
I
E
E
S
S
D
D
V
V
R
R
S
S
Accessing the DVR from a computer attached to the same router: If you are only going to access
the DVR from a computer that is attached to the same router as the DVR you only need to setup the
information in the NETWORK settings using either the DHCP option or assigning a static IP following the
instructions below. Since you are just going from one location to another on the same network port
forwarding and knowing the public IP address are not necessary. You would just access the DVR by
entering the IP address of the DVR from the NETWORK setup into the Internet Explorer browser window.
After you setup the NETWORK settings using DHCP or Static IP instructions skip down to the section:
To
access the DVR through Internet Explorer.
There are 4 ways you can setup the DVR to be accessed remotely; DHCP, Static IP, PPPOE, and DDNS.
DHCP: If your router is setup for DHCP, and most of them are by default, you can have the router assign an IP address to
the DVR. To do this go to the Main Menu and select the System icon (Red box in Fig 1), then select the Network icon (Red
box in Fig 2), this will display the NETWORK screen shown in Fig 3. Put a checkmark in the box at the end of the “Obtain
an IP address automatically” line (Red box in Fig 3) and then click the TEST button (Green box in Fig 3). After you get the
OK message in the lower left hand corner of the screen you click the Apply button to save the IP address. To find out
what IP address was assigned you need to go to the Information icon (Green box in Fig 1). After the router has assigned
the DVR an IP address it is a good idea to write down the address from the information section and then type the address
into the IP address line and then remove the checkmark from the box above the line. This is the IP address you will
forward ports 80 and 6036 to on the router so you can access the DVR from remote computers.
Fig 1 Main Menu Fig 2 System