Filter
Top Products
Or at the main menu:
• Select ‘Settings’ and press ‘Enter’ on the remote control
• Select ‘Enable standby - yes’ or ‘Enable standby - no’ and press ‘Enter’ on the remote control
• If standby is disabled, the Digital Picture Frame will not turn off at preset standby time.
To Set Bluetooth option:
With slideshow playing:
• Press ‘Menu’ on the remote control to go to the main menu
Or at the main menu:
• Select ‘Settings’ and press ‘Enter’ on the remote control
• Select ‘Bluetooth’ and press ‘Enter’ on the remote control
• Select ‘Accept all pictures’, ‘Reject all pictures’, or ‘Prompt me’ and press ‘Enter’ on the
remote control.
When ‘Accept all pictures’ option is selected, frame will accept all pictures beamed from Bluetooth
phones or PDAs’, when ‘Reject all pictures’ option is selected, frame will NOT accept any picture, when
‘Prompt me’ option is selected, frame will prompt user for any picture beamed from Bluetooth devices.
Resume Previous Slideshow:
While the menu is displayed, press ‘Play’ button on the remote control will resume the previous
slideshow.
Auto Resume
If the menu stays idle for more than 15 minutes, previous slideshow will resume.
Supported Media Type:
• For pictures: Supports GIF, JPG, BMP, PNG.
• For audio: Supports WAV, MP3, WMA
• For video: Supports WMV encoded at 320X240 – Digital Picture Frame will play video at
640X480
• For DivX, MPEG1-2, or WMV video that is larger than 320X240, install the ‘WMVConverter’
and encode it before dropping it to the Digital Picture Frame.
WMVConverter:
• You will need a computer to install WMVConverter.
• Insert the included CD into a CDRom drive of your computer,
• Go to the folder ‘WMVConverter’
• Double click Setup.exe to install ‘WMVConverter’ to your computer.
• Follow the instructions to complete the installation
• After the installation is complete, go to ‘Start’ menu in your computer, ‘WMVConverter –
Digital Spectrum Inc’, and launch ‘WMVConverter – Digital Spectrum Inc’.
• Click on ‘Browse’ to browse to your video, click ‘Start’ to start the encoding. Once it is
finished, the video will be stored in the same folder as the source video. The converted video
will have _DSI appended to its original filename.
• If you encounter an error “ClassFactory cannot supply requested class” when you convert
your video, go to the folder ‘WMVConverter’
• Install WMEncoder.exe.
• Convert your video again
PC Connection:
Via USB cable: