Filter
Top Products
33
SETUP > Image Setup
The options in Image Setup allow you to adjust the settings for your IP camera sensor and
image.
Brightness: This adjusts the brightness of the camera image. This is set to 60 by default.
Saturation: This adjusts the color saturation of the camera image. This is set to 60 by
default.
Contrast: This adjusts the contrast of the camera image. This is set to 0 by default.
Frequency: This option adjusts the camera sensor’s setting to avoid the image flickering
under certain light sources, such as florescent lights. This is set to Auto by
default.
White balance: You can change the white balance of the camera image by selecting a setting
from the dropdown box. This is set to Auto by default.
B/W: Ticking this checkbox will change the camera image into black and white.
Flip: This will flip the image vertically.
Mirror: This will flip the image horizontally in such a way that your left side will be on
the left side of the screen and vice versa.
Note: Mirror and Flip can be used if you choose to mount the DCS-2121 upside down on the
ceiling.