Filter
Top Products
Building Networks for People
DVS-301 User Manual v1.00
26
First access to Video Server
Through direct connection by null modem cable administrators can open the default web
browser and type in 200.1.1.1 as the address and press enter. Note that 200.1.1.1 will be the
default IP address in a dial-in connection and 200.1.1.100 will be the given IP address for the
user's PC by Video Server. The user name and password are the same as what was entered
during installation.
After successful authentication, administrators should see the motion pictures in the main page.
When using Microsoft Internet Explorer, administrators should allow a plug-in provided by Video
Server to install additionally. For best security, administrators must change the password on the
system page of configuration immediately. After changing the password, the browser will display
the authentication window again to ask for new password. Note that the new password will also
be used in the next dialup.
To make Video Server successfully work in dial-in and dial-out modes, follow the procedures
below for basic configurations. If people other than the administrator will be allowed to use
Video Server, the administrator should add these user profiles in the Security option. When
Video Server accepts dial-in connection and acts as a server, the user name and password
used in dialing are the same as what was stored in the user database managed for web access.
Any managed user can be authorized during PPP negotiation and access web pages. However