D-Link DVS-301 Security Camera User Manual


 
Building Networks for People
DVS-301 User Manual v1.00
46
PTZ camera configuration
Since Video Server can be used in either Ethernet network or PPP network, the single serial
port can be used to control either external COM port devices like a PTZ camera or modem.
While in PPP interface, go to Modem page for modem configuration. Options on this page will
be ignored.
Video Server supports RS232 and RS485 interfaces to control external serial port devices.
Refer to the hardware description to connect an RS485 device. The included camera control
cable can be used for Sony or Canon cameras. The choice "Auto Detect Driver" in driver
option will let Video Server detect the supported camera models sequentially from RS232 to
RS485.
Administrators can pull down the list to select UART "Interface Mode" according to the
connected device and select the camera model directly to save time in detection.
Video Server can support any other custom camera by selecting "Custom Camera" type. If the
attached device is not a PTZ camera, a specific URL can be utilized as an alternative method.
See the advanced section for details.