Filter
Top Products
Building Networks for People
DVS-301 User Manual v1.00
66
Uploading the configuration file
To update each Video Server’s configuration at once, upload the accurately formatted batch file
to CONFIG.INI. It is recommended to keep the original format, but changing values. Refer to the
section in configuration for details and optional values as well. After successfully receiving and
verifying the file, Video Server will self-update the configuration and restart automatically. Refer
to the previous section for further information.
Software revision upgrade
Customers can frequently check the appropriate product folder on our web site to download the
latest firmware. Only administrators can upgrade the system firmware of Video Server.
Easy way via Upgrade Wizard
Run the Upgrade Wizard included in the product CDROM and proceed by the prompts. Refer to
the user's guide of Upgrade Wizard for details.
Alternative via FTP
1. Decompress the compressed file in a local folder. A file named FLASH.BIN should appear.
2. Use the FTP program and change the working directory to the local folder where FLASH.BIN
exists.
3. Connect to Video Server with user name as “root” and password.
4. Use the PUT command to upload FLASH.BIN to Video Server. The file size is near 1.5 mega
bytes. It will take approximately 2 seconds in a local network, 2 minutes by null modem
connection or 6 minutes by modem, but still subject to user's network.
5. After upload is complete, close the connection.
6. If the received FLASH.BIN is checked without error, Video Server will update the software in
Flash memory and restart automatically. When Video Server starts writing firmware, both status
LED indicators will stay on until system restarts. It takes about 30 to 40 seconds. User must
keep the power stable during the update process. After the system restarts, Video Server may
need installation depending on whether the “Reset network at next boot” option is enabled or
not. After Video Server boots up, reload the web page in the browser.
If power fails during the software upgrade, the program in the memory of Video Server may
be destroyed permanently. If Video Server cannot restart properly, ask the dealer for technical
service.