Drive Medical Design 14027 Photo Scanner User Manual


  Open as PDF
of 20
 
15
Thepumpdoesn’twork 1. Checkiftheplugisinsertedrmlyintotheoutlet.
2. Turn on the power switch again.
• IfthepowerindicatorisONandthepumpstilldoesn’t
work, contact your local dealer immediately.
• IfthepowerindicatorisOFF,theremaybeafaultyoutlet.
Try to connect the power cord to another outlet. If the
power indicator is still OFF, contact a qualied
electrician for main power check.
Incompleteination
(LowPressure)
1. Foraquickcheck,adjustthepressuretoFirm.
2. Check to see if the tubes connected to the pump are
twisted or there is any leakage occurring.
• Alwayskeepthetubesstraight.
• Changetubesifthereisanyleakage.
• Ensure the CPR valves are closed. Ensure every
single cell is not broken.
Slowairow Adirtyltermaydecreasetheairow.Replacethelter
when dirty.
• Check the air lter at the back of the pump at least
once a month.
TROUBLESHOOTING
PROBLEMS SOLUTIONS
 previous next