Drive Medical Design 14027 Photo Scanner User Manual


  Open as PDF
of 20
 
16
SPECIFICATIONS
SYSTEM
ITEM SPECIFICATIONS
Classication ClassI;IPX0;AP/APGNO;TypeBF
Applied Part Mattress
InputRating AC120V60Hz;12W,1A
FuseRating 250V,T1A
PressureRange 30~60mmHg
Cycle Time 12 min/50Hz, 10 min/60Hz
Dimensions(Pump) 28.0×10.0×20.5cm(11.0x3.9x8.1in)
Weight 2.6kg(5.7lbs)
EnvironmentRequirements Temperature: Operation50°F~95°F(10~35°C)
Storage5°F~122°F(-15~50°C)
Shipping5°F~158°F(-15~70°C)
Humidity: Operation20%~80%non-condensing
Storage10%~90%non-condensing
SafetyStandards UL,c-UL,CE
*Duetothecontinualdevelopmentoftheaboveproducts,specicationsaresubjecttochangewithout
prior notice.
NOTE!
The above specifications are also applicable to those areas operating with the same power supply
range.
AP/APG NO indicates the device is NOT suitable for use in the presence of flammable anesthetic mixture
with air or flammable anesthetic mixture with oxygen or flammable anesthetic mixture nitrous oxide.
The mattress can be used in the presence of oxygen administered by nasal cannula or face mask.
Type BF symbol indicates the degree of protection against electric shock.
Instructions or reference information for repair of equipment parts are provided by the manufacturer,
please contact local dealer for further information.
 previous next