Drive Medical Design 14027 Photo Scanner User Manual


  Open as PDF
of 20
 
7
PUMP
The functions of the pump for the 14027 series are described below.
Power Switch (1)
The switch is at the right side of the pump.
Turn ON/OFF the power, the pump will start/stop operation.
Pressure-adjust Knob (2)
Turnthesoft/rmknobtosetacomfortablepressurelevel.
Normal Pressure Indicator (3)
Avisibleindicator(green)tellsthepressurehasreachedapresetoruser-denedlevel.
Low Pressure Indicator (4)
Avisibleindicator(yelloworred)warnsthepressureisbelowapresetoruser-denedlevel.
Alarm Reset (5)
Theaudible/visiblealarmturnsonwhenthepressureislow.
Tomutetheaudiblealarm,presstheresetbutton.Thevisiblealarmindicatorwillash.
Re-presstheresetbuttontoreactivatethealarm.
Static/Alternating control (6)
Press to set the air mattress either in static mode or alternating mode.
1. Power Switch
2. Pressure-adjustKnob
3. Normal Pressure Indicator
4. Low Pressure Indicator
5. Alarm Reset
6. Static/Alternating Control
Mattress
The 14027 series comes with cell type mattress of different materials (Nylon/PVC or PU), provided
optionallywiththepump.PleaserefertotheSpecicationssectionfordetails.
PRODUCT FUNCTIONS
2
5
6
4
3
1
 previous next