Filter
Top Products
Power Spot 700 II™
©Elation Professionals® Los Angeles, Ca. - wwww.ElationLighting.com - Page 23
8. FIXTURE MENU
The control panel located on the side of the fixture allows you to
access the main menu and make all necessary adjustments to the
POWER SPOT 700™. During normal operation, tapping the
“MODE” key once will access the fixture’s main menu. Once in the
main menu you can navigate through the different functions and
access the sub-menus with the Up and Down buttons. Once you
reach a field that requires adjusting, tap the ENTER button to
activate that field and use the UP and Down button to adjust the
field. Tapping the Enter button once more will confirm your setting.
Once a setting is saved the LED will briefly readout OK to confirm
a new setting has been made and locked into memory. You may
exit the main menu at any time without making any adjustments by
tapping the MODE button.
MODE ENTER
UP
DOWN
MODE ENTER UP DOWN
UPMODE ENTER DOWN
Display
Level
1
Level
2
Level
3
Remark
D001
Define the DMX start address
TEST
Test program of all functions
AUDI
ASLW
Self-running audio program (slow)
AFST
Self-running audio program (fast)
MSTR
Master for the audio program
SVPT
Basic position for the audio program
SIZE
Size for the audio program (NORM-BIG-MIDL-
SMAL)
LAMP
Switch on/of the lamp direct at the Power Spot 700
RESE
Reset
TIME
POWR
Running time of the fixture (no destructible)
LA1
Running time of the lamp (erasable)
LA2
Running time of the lamp (no destructible)
RPAN
Reverse Pan-direction
RTLT
Reverse Tilt-direction
DMOD
NORM
DMX Mode: Defines the number of DMX channels
EXT
DMX Mode NORM has to be selected at the
moment.
SPEC
MANU
Manual drive of all device functions
LAAU
Automatic lamp start
DLOF
Switch off lamp via DMX
DMXI
Reed out actual DMX-values
DISP
D ON
Display On/Off
REV
Twist the display (also pushing Up/Down keys at
the same time)
LHEA
Function not yet in use
LBAS
Function not yet in use
DOWN - UP
TEMP
Internal Temperature Reading