Elmo P30S Digital Camera User Manual


 
92
ENGLISH
OUTLINE OF THIS
CAMERA
Rear Panel
Name Function
Reference page
S-VIDEO OUT
(S-Video Output
Terminal)
To output video from the Mini DIN4P terminal to the
NTSC/PAL-system monitor (e.g., TV monitor).
P. 11 0
VIDEO OUT
(Composite Video
Output Terminal)
To output video from the RCA pin-jack terminal to
the NTSC/PAL-system monitor (e.g., TV monitor).
P.109
DVI OUT
(DVI Output Terminal)
To output digital video signal to the DVI input
device (e.g., projector, PC monitor).
P.108
RGB OUT
(Analog RGB Output
Terminal)
To output analog video signal to the RBG input
device (e.g., projector, PC monitor).
P.108
RGB IN
(Analog RGB Input
Terminal)
To output the input video from the analog RGB
output terminal when [RGB IN] is selected in the
Display mode.
P.109
RS-232C
(RS-232C Terminal)
To control the main body from the PC through the
connected RS-232C cable.
P.146
12VDC IN
(Power Socket)
A plug-in receptable for the AC adapter. P.107
DIP Switch
To execute the following switching:
[A] key: Invalid
[B] key: Invalid
[C] key: To switch the video output system
[D] key: To switch the video output screen size.
Note:
• When changing the DIP switch key settings, be sure to turn OFF the power supply to the
main unit beforehand.
• The defaults of the DIP switch vary depending on the place where the Camera is used.
ӱ
Ӳ
ӳ
Ӵ
ӵ
ӷ
Ӷ
Ӹ
0
1
A B C D
Display of Rear panel
0
1
[C] key
NTSC
PAL
[D] key
Over-scan
Under-scan
[A] key
Invalid
[B] key
Invalid
書画カメラ P30S.book 92 ページ 2008年1月24日 木曜日 午後6時38分