Filter
Top Products
140
ENGLISH
OPERATION OF THIS
CAMERA
5.
Select [ USB MODE]
→
[MASS
STORAGE] from the OSD Setting
menu by using the [ ]
buttons on the front operating panel
or wireless remote control.
6. Connect the USB cable to the PC.
The Camera is recognized as a removable disk. The image data saved on the
SD card can be viewed by using the viewer software on the PC.
• The image data has been saved as JPG files in the following folders:
⑦ For Connecting to PC with USB Cable (P.110)
Note:
• When the USB cable is connected to the PC for the first time, the necessary driver is
installed automatically by the Plug-and-Play function of Windows. For the second and
subsequent connections, the driver installation will not be displayed.
• The image cannot be saved, deleted, locked or unlocked or the SD card cannot be
formatted from the PC.
• The image file cannot record the correct date and time.
• When the power supply to the Camera is ON, do not plug/unplug the USB cable into/from
the Camera, or malfunction will be caused to the Camera or PC.
• Do not switch [USB MODE] on the OSD during the USB connection.
• It is recommendable that the USB cable to be used should be of USB 2.0 complied.
• When the PC is connected to the Camera with the USB cable, the frame rate of the camera
video is lowered.
OSD Setting Menu
APPLICATION
MASS STORAGE
IMAG0001.JPG
IMAG0002.JPG
My Computer
Removable Disk
DCIM
100_ELMO
Ref.
書画カメラ P30S.book 140 ページ ２００８年１月２４日 木曜日 午後６時３８分