Envision Peripherals WebCam Digital Camera User Manual


 
ADVANCED FEATURES – Settings Tab – Continued
Image Mirror – Changes into mirror image.
Image Flip – Turns the image upside down.
Low Light – Optimizes the image in low-light situations
In/Out Door – Optimizes the image for indoor or outdoor lighting.
USB Bandwidth – Decreasing the value will leave more bandwidth for
other USB devices, but will slow down frame rate. Leaving the Auto box
checked is recommended.
Exposure – Adjusts the exposure time of the image sensor. Increasing
exposure will slow down frame rate. Leaving the Auto box checked is
recommended.
White Balance Increase/decrease the amount of Red color and
increase/decrease the amount of Blue color in the image for manual white
balance adjustment. Leaving the Auto box checked is recommended.
Flicker – Helps to reduce image flicker when V-Cam is used under
fluorescent lighting. Select the value that most closely matches your local
electrical AC frequency. For North America, choose 60Hz.
Backlight Comp. – Check this box to enable backlight compensation in
situations where there is strong light in the background, such as when
there is a sun-lit window behind you.
B/W Mode – Check this box to set the image in black and white mode.
Auto LED Mode – Changing these settings will have no effect since this
particular webcam model does not have LED functions.
Default – Click on this button to restore all values in the Settings tab to
default factory settings.
Save – Saves the current settings to the camera. Previously saved settings
will be overwritten.
Load – Loads the most recently saved settings.
13
English