Filter
Top Products
46 Automatic Document Feeder
Installing the Automatic Document Feeder
Follow the steps below to install the automatic document feeder on your scanner:
1. Make sure your scanner is turned
off and unplug the cables.
2. Remove your scanner’s document
cover by grasping the back of the
cover as shown and easing the
cover up.
3. Attach the two large feet as shown.
4. Insert the installation screws
that came with the ADF into
the holes in the back of the
scanner and secure them with
the enclosed screwdriver tool,
as shown.
Because the automatic document feeder is heavy, you may want to have
someone help you with this procedure. Also, the document feeder is
large, so be sure to have adequate space around the scanner.
1640XL.book Page 46 Wednesday, November 19, 2003 8:46 PM