Filter
Top Products
66
1. Wait until the last photo is printed and printing stops
completely. The last photo remains in the printer without
being cut.
2. Press the z roll paper button to cut the photo.
c
Caution:
❏ After roll paper is cut, do not pull the printed roll paper until
the paper is completely ejected. Otherwise you may damage
the printer.
❏ If printing is done on premium glossy photo paper or
premium semigloss photo paper, remove the photos from the
output tray immediately after printing, and spread the photos
one by one. If they are stacked, the color of the stacked areas
may change.
Printing area and margins
You can change the printing area and the margins for roll paper
with the printer driver settings. There are two margin settings.
One setting creates a 3 mm margin on both sides of your printout.
The other setting prints with no margins on either side of your
printout.