Epson Photo 925 Photo Printer User Manual


 
96
Paper improperly loaded
If you have loaded the paper too far into the printer, the printer
cannot feed the paper correctly. Turn the printer off and gently
remove the paper. Then turn the printer on and reload the paper
properly.
Paper is not ejected fully or is wrinkled
Try one or more of these solutions:
If the paper does not eject fully, press the
( maitenance
button, then open the printer cover and remove the paper.
Also, check the Paper Size setting in the Control Panel.
If the paper is wrinkled when it comes out, it may be damp
or too thin. Load a new stack.
Note:
Store any unused paper in its original packaging in a dry area. See
Paper on page 139 for specifications.
Printer Does Not Print
If the printer does not print, check and see if one of the following
error indications is displayed, then try the solutions listed.
LCD panel is off.
Only the LCD panel is on
The
( maintenance light is flashing or on
One of the ink out lights is flashing or on
Ink out lights are on and the other lights are flashing