Epson Photo 925 Photo Printer User Manual


 
81
English
c
Caution:
Never turn the power supply to the printer off while the
progress meter is displayed in the LCD panel. Doing so may
damage the printer.
4. Follow the instructions shown on the display and press the
Custom 1 button.
5. The print head cleaning will start.
If print quality has not improved after repeating this procedure
four or five times, turn the printer off and leave it alone overnight,
then try head cleaning again.
If the print quality still has not improved, one or both of your ink
cartridges may be old or damaged and may need to be replaced.
To replace an ink cartridge before it is empty, see Replacing an
Ink Cartridge on page 72.
If print quality remains a problem after replacing the ink
cartridges, contact your dealer.
Note:
To maintain print quality, we recommend turning on the printer for at
least one minute every month.
Aligning the Print Head
If you notice misalignment of vertical lines, you may be able to
solve this problem from the LCD panel.
Using the control panel buttons
Follow the steps below to align the print head using the control
panel buttons.
1. Check that no warnings or errors are displayed in the LCD
Panel.