Filter
Top Products
46 Solving Problems
The image is garbled.
■ Make sure your computer and/or projector or monitor are
securely connected at both ends to the document camera.
■ Check the DIP switches on the document camera. If video output
is set to NTSC and the document camera is connected to a
monitor that supports PAL, the image may appear garbled. See
page 20 for instructions on adjusting the DIP switches.
A color image displays in black and white.
■ Try pressing the COLOR/B&W button on the remote control to
switch to color mode.
■ Check the DIP switches on the document camera. If video output
is set to NTSC and the document camera is connected to a
monitor that supports PAL, the image may display in black and
white. See page 20 for instructions on adjusting the DIP switches.