EverFocus EPTZ900 Security Camera User Manual


 
4-33
4. EPTZ900/500 FUNCTION SETUP AND OPERATION
4.1. Manual Control Mode
¾ Manual control: Shift Joystick Up/Down/Left/Right, and turn it
Clockwise/Counterclockwise to control speed dome.
Use the control keys which are Zoom, Focus and IRIS function keys on the
keyboard to zoom In/Out, focus N (near)/F (Far), or IRIS +/-.
¾ HOME Mode: The camera view will go back to the home position when there is no
keyboard operation in a specific time. The home position and the specific time can
be set by press Set + Home.
4.2. Auto Pan Mode
¾ Two point auto pan: Press A.Pan to enter the auto pan mode, and then the
system will ask you to enter the auto pan speed (1~239). Press Enter to start auto
pan.
In order to set the two points, press Set + A.Pan, and then enter the dwell time
(1~239 seconds) of each point.
¾ 360° auto pan: Press Shift + A.Pan to enter the 360° auto pan. The camera will
turn 360° automatically, but not tilt.
4.3. Position Setting
¾ Focus on a preset position: Press the number key, and then press Position to
focus on the number of preset position; or you can press Position, then enter the
preset position number, and then press Enter to focus on the number of preset
position.